GXR-1000SI Specification
| General | ||
| Model | SMAP GXR-1000SI UPS | |
| Topology | True on-line double conversion | |
| Configuration | Rack/Tower | |
| Catalogue Series | GXR, 2U Rack/Tower UPS | |
| Rating (VA/Watts) | 1000/900 | |
| Dimension (W x D x H, mm) | 438 x 410 x 88 | |
| Dimension (W x D x H, inches) | 17.2 x 16.1 x 3.5 | |
| Net Weight | 14.2 kg | |
| Efficiency | 91%, ECO mode: 98% | |
| Transfer Time | Zero | |
| Waveform | Pure sine wave | |
| Electrical Input | ||
| Input Phase | Single phase with ground (2 wires + ground) | |
| Input Connection | (1) IEC60320-C14, 10A |  |
| Voltage Range | 110VAC ~ 300VAC ±5% | |
| Frequency Range | 40Hz ~ 70Hz auto sensing | |
| Input Power Factor | ≥0.99 | |
| Electrical Output | ||
| Output Phase | Single phase with ground (2 wires + ground) | |
| Output Receptacle | (8) IEC60320-C13, 10A |  |
| Output Voltage | 220VAC (Default configurable to 200/208/230/240VAC) | |
| Voltage Regulation | ± 1% | |
| Synchronized Frequency Range | 50/60 Hz ± 0.1 Hz | |
| Output Power Factor | 0.9 | |
| Current Crest Ratio | 3:1 | |
| Harmonic Distortion (THDU) | ≤2% THD (Linear Load) | |
| Overload capability | 110% continuous, 110%~130% with 5 min | |
| Battery | ||
| Battery | Sealed Lead Acid Maintenance Free battery | |
| Battery Voltage | 36VDC | |
| Typical Recharge Time | Depends on the capacity of the external battery bank | |
| Indicators, Communications & Management | ||
| Rotatable LCD Panel | UPS status, load level, battery level, input/output voltage, discharge remaining time, and fault conditions | |
| Audio and Visible Alarms | Battery mode, low battery, overload, fault | |
| Communications | USB / RS-232, SNMP RJ-45 network, dry contact, intelligent slot | |
| EPO | Yes | |
| Optional Accessories | SNMP Network management card, Modbus card, Dry contact card, Isolation transformer, Maintenance bypass switch, ATS 16 switch, External battery pack | |
| Support Software | Windows family, Linux, Unix, Mac, Hyper-V, VMWare, etc. | |
| Environmental & Standards | ||
| Operating Conditions | 0 ~ 95% RH @0 ~ 40°C (non-condensing) | |
| Audible Noise | < 48 dB at 1 meter | |
| IP Rating | IP20 (other option) | |
| Safety & Standards | IEC/EN 62040-1/2/3, CE | |