GXR-S 1-3kVA

GXR 1-3 kVA UPS - Features

• True online double-conversion
• Output power factor of 0.9
• Wide input voltage range (110-300 VAC)
• 50Hz/60Hz frequency converter mode
• Eco mode operation for energy saving (ECO)
• Emergency power off function (EPO)
• Smart battery charger optimizing battery performance up to 50%
• Maintenance bypass switch available
• Hot-swappable battery design
• Programmable power management outlets

GXR-S 1-3 kVA UPS - Option

• SNMP card is for UPS monitoring and management, it can get hold of the status from and issue commands to the UPS. User can use SNMP managers or Web browser to manage the UPS through an Ethernet. It supports for virtually all operating systems to peacefully shut down the computers over the network.
• 1 x RJ45 interface
  
  

• The AS400 card provides dry-contact closure signal “OPEN” or “CLOSE”. It is applicable to the UPS with availability of Intelligent Slot. All online UPS has been equipped with Intelligent Slot.
• 1 x DB9 interface or Terminal block
  
  

• The ModBus card provides UPS systems with the functionality of communication through MODBUS protocol: The Modbus card implements MODBUS RTU protocol; provides MODBUS functions including read Holding Registers and write Registers; and provides RS232 and RS485 interface
  
  

• This ATS-16 is designed with two independent power inlets to supply power to the load from a primary power source. Should primary power source fails, the secondary will automatically back up the connected equipment without any interruption.
  
  

• The product is used as an external Power Distribution Unit (PDU) in conjunction with UPS systems or large-scale voltage regulators. It allows to manually transfer the connected equipment to utility power via a bypass switch, permitting scheduled maintenance or UPS replacement without power interruption.

• The product is used as an external Power Distribution Unit (PDU)

GXR-S 1-3 kVA UPS UPS - Software

The ViewPower is UPS management software which is perfect for users or enterprises can monitor and manage from one to multiple UPSs in a networked environment, either LAN or Internet. It can not only prevent data loss from power outage and safely shutdown systems but also store programming data and scheduled shutdown UPSs. The standard version is connected by USB to monitor the PC or server directly.

• Allows control and monitoring of multiple UPSs via LAN and internet (Pro version)
• Real time dynamic graphs of UPS data (voltage, frequency, load level, battery capacity)
• Safely OS shutdown and protection from data loss during power failure
• Warning notifications via audible alarm, popup screen, broadcast, SMS and email
• Scheduled UPS on/off, battery test, outlet on/off control and audible alarm
• Password security protection and remote access management