GXR-31 10-20 kVA

GXR-31 10-20 kVA UPS - Features

• Ture online double-conversion
• DSP technology guarantees high performance
• Output power factor of 0.8
• Wide input voltage range (110-300 VAC)
• Active power factor correction in all phases
• Built-in phase auto adapt function simplifies wire installation
• 50Hz/60Hz frequency converter mode
• Eco mode operation for energy saving (ECO)
• Emergency power off function (EPO)
• Generator compatible
• 3-stage extendable charging design for optimized battery performance
• Maintenance bypass switch available

GXR-31 10-20 kVA UPS - Option

• SNMP card is for UPS monitoring and management, it can get hold of the status from and issue commands to the UPS. User can use SNMP managers or Web browser to manage the UPS through an Ethernet. It supports for virtually all operating systems to peacefully shut down the computers over the network.
•  1 x RJ45 interface

• The AS400 card provides dry-contact closure signal “OPEN” or “CLOSE”. It is applicable to the UPS with availability of Intelligent Slot. All online UPS has been equipped with Intelligent Slot.
• 1 x DB9 interface or Terminal block

• The ModBus card provides UPS systems with the functionality of communication through MODBUS protocol: The Modbus card implements MODBUS RTU protocol; provides MODBUS functions including read Holding Registers and write Registers; and provides RS232 and RS485 interface

• The MBS module is used as an external maintenance bypass switch to provide continuous power without interruption of the connected loads during UPS scheduled maintenance or battery replacement. It’s perfect to use in conjunction with 6kVA and 10kVA UPS systems

GXR-31 10-20 kVA UPS - Documents

• GXR-31 10-20 kVA UPS Catalogue
• GXR-31 10-20 kVA UPS Manual

GXR-31 10-20 kVA - Software

The ViewPower is UPS management software which is perfect for users or enterprises can monitor and manage from one to multiple UPSs in a networked environment, either LAN or Internet. It can not only prevent data loss from power outage and safely shutdown systems, but also store programming data and scheduled shutdown UPSs.

• Allows control and monitoring of multiple UPSs via LAN and internet
• Real time dynamic graphs of UPS data (voltage, frequency, load level, battery capacity)
• Safely OS shutdown and protection from data loss during power failure
• Warning notifications via audible alarm, popup screen, broadcast, SMS and email
• Scheduled UPS on/off, battery test, outlet on/off control and audible alarm
• Password security protection and remote access management